I know, I know, J-Lube and X-Lube are widespread within the fetishes I’m producing porn in. However:
J-Lube has lots of sugar in it, so not suitable for people with diabetes or people with pussies. I had nasty yeast infections every time I used J-Lube (even if only used anally, it just goes everywhere). Plus it stayed forever in my bottle, annoying to clean off, moulds easily because of the sugar etc. All in all a gross experience lol. J-Lube is not purified and is absolutely not suitable for human use! (Source: their customer service) Use for special effects or so only.
X-Lube is a sugar-free alternative. However I’m concerned about possible cancerous effects of contaminants that are usually found in its only component Polyethylene Oxide (PEO). It probably has a molar mass of 2 to 4 million, just like J-Lube. I have searched the web for this chemical, however they are either ridiculously expensive or from China/Alibaba without purification. I also contacted the manufacturer about this topic, but still have not received an answer. As of now, I would assume that PEO and thus X-Lube as well as J-Lube is usually contaminated with 1,4-dioxane.
I’ll end this with this quote:
“Even though responsible manufacturers do make efforts to remove these impurities (1,4-dioxane that can be removed from cosmetics through vacuum stripping during processing without an unreasonable increase in raw material cost), the cosmetic and personal care product industry has shown little interest in doing so. Surprisingly, PEG compounds are also used by natural cosmetics companies.”
I personally use Hydroxyethyl cellulose. It’s used in almost all lubes and if you have the powder yourself, you can adjust the thickness, mix it with Propylene glycole/glycerine or white colours (and without stinging weird preservatives) 🙂
Another alternative is HPMC (Hydroxypropylmethylcellulose). You can get this one usually quite cheap in food quality, because it’s used as a food additive and for medicine a lot. However, I didn’t like this because it left white gunk everywhere when it dried.
A last alternative I know of is CMC (Carboxymethyl cellulose). I heard it’s super cheap in some countries and used for porn shootings where they need a lot of fake cum, but supposedly smells like paste/glue and haven’t tried it personally.
Finally I make this blog post. I wanted to do this for a long time *o*.
I started making my own lube, because for some reason most of the lubes I can get anywhere stings. I have no idea if I’m allergic or hypersensitive to some preservatives or too much glycerine or so, however it’s simply irritating and feels bad.
Whatsoever, the same lube usually doesn’t sting when I use it in my pussy. That’s why I already made the assumption that this might be the reason why people say “anal sex hurts so much!!”. Maybe I’m wrong though and I simply have an allergy to a preservative or sth.
Whatever, here’s the guide to make your own lube:
ON YOUR OWN RISK – NO GUARANTEE THAT THIS IS SAFE
Hydroxyethyl Cellulose aka Natrosol 250HX
Drinkable Still Water or Distilled Water (will last longer with distilled)
Glycerine or Propylene Glycol (optional)
Baby powder / talcum or Titanium Dioxide for colouring it cum-like white (optional and might be carcinogenic if inhaled, so be careful while handling)
As well as a simple sports bottle. I’m using this Nike bottle in clear/pink rise. Sadly the cute pink one is sold out on eBay, so here’s a similar one on Amazon.de
You either need Hot/Warm Water or Glycerine/Propylene Glycole to dissolve polymers with a high molar mass like Hydroxyethyl Cellulose. Here’s the guide with Hot water:
Put hot/warm water in the bottle
add the hydroxyethyl cellulose powder, about 5g-10g per 200ml water, depends on your preference. The more you use, the thicker it’ll get hehe
add cum-like white powder (optional)
Let stand for 5-10 minutes. Wait until it cooled down before use
Store in fridge if not used. Will last maximum a week there.
Here it is with glycerine / propylene glycol:
Put either glycerine or propylene glycol in the bottle (or both, try around what you prefer), about 20-30g
add the hydroxyethyl cellulose powder, about 5g-10g if you plan to use 200ml water, depends on your preference. The more you use, the thicker it’ll get hehe
Stir by simply rotating the bottle until the powder dissolved in the glycerine/pg
add distilled water. If not available use still water (warm or cold)
add cum-like white powder (optional)
Let stand for 5-10 minutes. Wait until it cooled down before use
Store in fridge if not used. Will last max. one week with normal water.
With last about a week with distilled water in the frdige.
With propylene glycol it might even last up to a month or longer if stored in the fridge.
If you see weird things floating around or if the smell has changed, throw it out.
For all Sex Workers following me, I decided to create a post regarding Copyright infringements. Sadly, this is a common thing in porn biz. The first purchase on a clip website is usually a person who’s gonna steal the clip, upload it to filehoster and spread the link on shady websites with 5 pop-up ads opening before anybody can access these links in the first place.
I put a lot of money, effort and energy in producing porn. Cameras, Sex Toys, Computer, Software, Hosting, all of it costs money. And not just a bit. I paid 700€ for my camera, 200€ for Editing Software and another 700€ for my fucking machine. And how much f****ing time do I spend with editing my clips, uploading them to porn websites and new platforms again because banks still discriminate sex work in 2022. And yes, I thought about stopping all of porn because of this.
I am tired of black hats making money from stealing other people’s hard work.
Whatever, ranted enough. Here’s a tutorial on how to take your stolen content down. It might look a bit long in the beginning, however once you know how it goes, it’s about 2 minutes per website:
find pirated clips / recordings
This is rather easy. Just go to Google, Bing or DuckDuckGo (or all of these three) and search for your stage name and siterip, recording or similar. For example:
The results should look sth like this:
get the source links
This is a bit nerdy, but not too difficult. Install JDownloader. It’s a software mostly used for downloading pirated content, however we can use its link-grabbing features for our own purpose to fetch all the links, so we can take them down. Don’t worry, the software itself is legal.
Change one setting in JDownloader: remove all tick boxes despite Data in the User Interface Settings:
This will output the actual hoster links instead of referrer, source or container links. We need the Data links for a Copyright Claim. Black Hats try to hide them behind referrers or in containers. However, with this setting we reach their sensitive spot 😉
Now, go to one of the pirate websites and copy the link in the address bar (for example https://siterips.cc/onlyfans-com-daisy-deep-daisygoesdeep-siterip-2021/ ) JDownloader should automatically grab all links. If not, click on “Add New Links” in the LinkGrabber:
In the pop-up, paste the link and click on Continue
Now it should look similar to this:
What we’re looking for are files bigger than 3 MiB usually, especially photos and videos. Just sort by size, select all the big size files (hold down shift) and with a right click -> Properties -> Show Download URLs we get all the source links
In the new small pop-up, select all links with Control + A (on Macs: ⌘ + A), again do a right click and click “Copy URLs”
They are now copied to your clipboard. Done.
Sending an abuse complaint
This is rather quick. Most hosters take Copyright claims seriously and take the content down within 24 hours. Find the abuse mail address of the hoster somewhere in their footer links. Some of them are:
Now simply write a mail to them and paste all the links with ctrl + V (on Macs ⌘ + V). You can use this example text:
Dear Sir or Madam,
I own all rights on the images and footage listed below. Take it down within 24 hours or I’ll take further actions if needed.
Link to copyrighted content: onlyfans.com/your-name-here
– Your Stage Name
Always include a link to the copyrighted content. This speeds up the process.
Until now, I never had to contact a lawyer and had taken down all content within maximum a week. In most cases, I get a reply within an hour that looks like this:
Some hosters might want you to confirm your identity (bullsh*t!). DO NOT EVER SEND THEM YOUR PASSPORT, LEGAL NAME OR ANY OTHER PRIVATE DATA!
If this does not work, use Cloudflare’s Copyright Report function. Most illegal content is protected using Cloudflare’s Content Distribution Network and using their function you will get the name of the hoster and their abuse mail address. DO NOT USE YOUR REAL NAME OR ADDRESS ON CLOUDFLARE BECAUSE IT GETS SHARED WITH THE FRAUDSTERS. ONLY USE YOUR STAGE NAME, PORN MAIL ADDRESS AND A FAKE POSTAL ADDRESS
Using Cloudflare’s Report function I actually made some interesting findings:
Webzilla – email@example.com tezfiles com k2s cc (Keep2Share)
Alexhost – firstname.lastname@example.org recurbate com rapidcloud cc fastfile cc
IP Volume – email@example.com camhoes tv cambro tv
Melbicom via CryptoServers org – firstname.lastname@example.org rec-tube com
Zomro B.V. – email@example.com trydildo net analonly org fistinghd net amateurfetishist com
Scalaxy B.V. – firstname.lastname@example.org evilfist com
As you can see, it’s only a few webhosters that host our stolen content. Most of them are by the way based in the Netherlands and not in countries that are tough to reach like China or Russia. If we keep sending copyright claims to Cloudflare and these hosters, we might even achieve that some websites will get taken down completely or their networks getting banned from the cloudflare network which is typically the end for such websites. I have also threatened Cloudflare with further legal steps and lawsuits if they continue to protect such illegally hosted content.
some last words
Doing this might seem like a lot of unnecessary effort. Loyal fans wouldn’t use these websites either. Yes that’s so true, however I’m simply pissed off that black hats (What’s a black hat?) make profits from my work.
If you need more advice or have questions, feel free to comment below.